Peugeot Partner 2008 remap
Diesel · Flash via OBD · Figures published for this engine · Remote remap available UK-wide from £199
Is a remap worth it on the Peugeot Partner 2008?
A worthwhile remap. The gain is clearly felt on the road, especially in the mid-range where the torque increase lands.
What each stage needs
| Stage | Power | Torque | Hardware |
|---|---|---|---|
| Standard | 75 bhp | 184 Nm | None |
| Stage 1 | 90 bhp | 214 Nm | Software only |
| Stage 2 | 112 bhp | 251 Nm | Uprated intercooler, high-flow intake, sports catalyst |
Risk on this engine: low
- Significant 20% gain: boost and fuelling pushed beyond factory settings.
- Diesel: no knock risk. Primary risks are EGT, turbo health, and injector wear.
How to keep the risk down
- Check intercooler efficiency before tuning.
- Monitor EGT under hard driving: sustained temps above 700 C accelerate turbo wear.
- Keep a copy of the original ECU file before flashing.
Remote remap for your Peugeot Partner 2008: Stage 1 from £199
No trip to a workshop. ORCA Remapping, part of the same company as BeakCheck, tunes your car's own ECU file and sends it back, UK-wide.
| Service | Price | Needs |
|---|---|---|
| Stage 1 Remote | £199 | Standard car, software only. 90 bhp and 214 Nm on this engine. |
| Stage 2 Remote | £299 | Uprated intercooler, high-flow intake, sports catalyst already fitted. 112 bhp and 251 Nm. |
| Diagnostic file analysis | £49 | Read-only check of the existing file: detects a previous tune before you buy a used car. |
Paid up front on orcahq.co.uk once ORCA confirms your engine and tool. Or ask first, no obligation:
Questions owners ask
How much power does a Peugeot Partner 2008 gain from a remap?
A Stage 1 remap adds about 15 bhp and 30 Nm, taking it from 75 to 90 bhp. Stage 1 is software only.
Is it safe to remap a Peugeot Partner 2008?
Remap risk is rated low (3/10). Significant 20% gain: boost and fuelling pushed beyond factory settings. Check intercooler efficiency before tuning.
Does a remap affect the MOT or insurance on a Peugeot Partner 2008?
A remap does not affect the MOT test, which does not read the ECU calibration. It is a modification for insurance purposes and must be declared to your insurer; most mainstream insurers accept a declared Stage 1 with a premium adjustment.
How is a Peugeot Partner 2008 remapped?
Through the OBD diagnostic port in the cabin. The original file is read and saved first, then the modified calibration is written. Typically under two hours.
Check your exact car by registration
Free DVLA and MOT check, plus the remap verdict for the engine actually fitted to your car.
Other Peugeot engines
Remapping guides
Power figures are published Stage 1 and Stage 2 results for this engine and are a guide. Actual gains depend on the car's condition, fuel and the map used. BeakCheck and ORCA Remapping are trading names of Bloor Engineering Ltd.