Peugeot 1007 2005 2009 remap
Diesel · Flash via OBD · Figures published for this engine · Remote remap available UK-wide from £199
Is a remap worth it on the Peugeot 1007 2005 2009?
A worthwhile remap. The gain is clearly felt on the road, especially in the mid-range where the torque increase lands.
What each stage needs
| Stage | Power | Torque | Hardware |
|---|---|---|---|
| Standard | 111 bhp | 263 Nm | None |
| Stage 1 | 142 bhp | 312 Nm | Software only |
Risk on this engine: medium
- High 28% gain: substantial stress on turbo(s) and fuel system.
- Diesel: no knock risk. Primary risks are EGT, turbo health, and injector wear.
How to keep the risk down
- Uprated intercooler strongly recommended.
- Full engine health check required.
- Verify fuel pump condition.
- Monitor EGT under hard driving: sustained temps above 700 C accelerate turbo wear.
- DPF (if fitted) will accumulate soot faster: ensure it is in good condition.
- Keep a copy of the original ECU file before flashing.
Remote remap for your Peugeot 1007 2005 2009: Stage 1 from £199
No trip to a workshop. ORCA Remapping, part of the same company as BeakCheck, tunes your car's own ECU file and sends it back, UK-wide.
| Service | Price | Needs |
|---|---|---|
| Stage 1 Remote | £199 | Standard car, software only. 142 bhp and 312 Nm on this engine. |
| Diagnostic file analysis | £49 | Read-only check of the existing file: detects a previous tune before you buy a used car. |
Paid up front on orcahq.co.uk once ORCA confirms your engine and tool. Or ask first, no obligation:
Questions owners ask
How much power does a Peugeot 1007 2005 2009 gain from a remap?
A Stage 1 remap adds about 31 bhp and 49 Nm, taking it from 111 to 142 bhp. Stage 1 is software only.
Is it safe to remap a Peugeot 1007 2005 2009?
Remap risk is rated medium (5/10). High 28% gain: substantial stress on turbo(s) and fuel system. Uprated intercooler strongly recommended.
Does a remap affect the MOT or insurance on a Peugeot 1007 2005 2009?
A remap does not affect the MOT test, which does not read the ECU calibration. It is a modification for insurance purposes and must be declared to your insurer; most mainstream insurers accept a declared Stage 1 with a premium adjustment.
How is a Peugeot 1007 2005 2009 remapped?
Through the OBD diagnostic port in the cabin. The original file is read and saved first, then the modified calibration is written. Typically under two hours.
Check your exact car by registration
Free DVLA and MOT check, plus the remap verdict for the engine actually fitted to your car.
Other Peugeot engines
Remapping guides
Power figures are published Stage 1 and Stage 2 results for this engine and are a guide. Actual gains depend on the car's condition, fuel and the map used. BeakCheck and ORCA Remapping are trading names of Bloor Engineering Ltd.