Peugeot 607 2000 2009 remap
Diesel · Flash via OBD · Figures published for this engine · Remote remap available UK-wide from £199
Is a remap worth it on the Peugeot 607 2000 2009?
This is one of the stronger candidates for a remap. The factory map leaves a lot on the table and a Stage 1 flash recovers most of it with no hardware.
What each stage needs
| Stage | Power | Torque | Hardware |
|---|---|---|---|
| Standard | 136 bhp | 325 Nm | None |
| Stage 1 | 185 bhp | 427 Nm | Software only |
Risk on this engine: high
- Very high 36% gain: approaching stock component limits.
- Torque rises by 102 Nm (31%): elevated drivetrain and clutch stress.
- Diesel: no knock risk. Primary risks are EGT, turbo health, and injector wear.
How to keep the risk down
- Full engine health inspection mandatory.
- Uprated intercooler and charge pipes required.
- Oil cooler upgrade strongly advised.
- Inspect clutch condition before tuning. Check dual-mass flywheel.
- Monitor EGT under hard driving: sustained temps above 700 C accelerate turbo wear.
- DPF (if fitted) will accumulate soot faster: ensure it is in good condition.
- Keep a copy of the original ECU file before flashing.
Remote remap for your Peugeot 607 2000 2009: Stage 1 from £199
No trip to a workshop. ORCA Remapping, part of the same company as BeakCheck, tunes your car's own ECU file and sends it back, UK-wide.
| Service | Price | Needs |
|---|---|---|
| Stage 1 Remote | £199 | Standard car, software only. 185 bhp and 427 Nm on this engine. |
| Diagnostic file analysis | £49 | Read-only check of the existing file: detects a previous tune before you buy a used car. |
Paid up front on orcahq.co.uk once ORCA confirms your engine and tool. Or ask first, no obligation:
Questions owners ask
How much power does a Peugeot 607 2000 2009 gain from a remap?
A Stage 1 remap adds about 49 bhp and 102 Nm, taking it from 136 to 185 bhp. Stage 1 is software only.
Is it safe to remap a Peugeot 607 2000 2009?
Remap risk is rated high (8/10). Very high 36% gain: approaching stock component limits. Full engine health inspection mandatory.
Does a remap affect the MOT or insurance on a Peugeot 607 2000 2009?
A remap does not affect the MOT test, which does not read the ECU calibration. It is a modification for insurance purposes and must be declared to your insurer; most mainstream insurers accept a declared Stage 1 with a premium adjustment.
How is a Peugeot 607 2000 2009 remapped?
Through the OBD diagnostic port in the cabin. The original file is read and saved first, then the modified calibration is written. Typically under two hours.
Check your exact car by registration
Free DVLA and MOT check, plus the remap verdict for the engine actually fitted to your car.
Other Peugeot engines
Remapping guides
Power figures are published Stage 1 and Stage 2 results for this engine and are a guide. Actual gains depend on the car's condition, fuel and the map used. BeakCheck and ORCA Remapping are trading names of Bloor Engineering Ltd.