BCBeakCheck
Remap database › Peugeot › Peugeot 508 2011

Peugeot 508 2011 remap

Diesel · Flash via OBD · Figures published for this engine · Remote remap available UK-wide from £199

The Peugeot 508 2011 makes 150 bhp and 370 Nm as standard. A Stage 1 ECU remap takes it to 205 bhp and 447 Nm, a gain of 55 bhp (37%) with no hardware changes. Stage 2, with uprated intercooler, high-flow intake, sports catalyst, reaches 205 bhp and 447 Nm. Remap risk for this engine is high, 7 out of 10.
Standard
150 bhp
370 Nm
Stage 1
205 bhp
447 Nm · +55 bhp
Stage 2
205 bhp
447 Nm · +55 bhp
Remap risk
HIGH
7 / 10

Is a remap worth it on the Peugeot 508 2011?

This is one of the stronger candidates for a remap. The factory map leaves a lot on the table and a Stage 1 flash recovers most of it with no hardware.

What each stage needs

StagePowerTorqueHardware
Standard150 bhp370 NmNone
Stage 1205 bhp447 NmSoftware only
Stage 2205 bhp447 NmUprated intercooler, high-flow intake, sports catalyst

Risk on this engine: high

How to keep the risk down

Remote remap for your Peugeot 508 2011: Stage 1 from £199

No trip to a workshop. ORCA Remapping, part of the same company as BeakCheck, tunes your car's own ECU file and sends it back, UK-wide.

Read the ECUWith your own tool (AutoTuner, KESS3, Alientech KTM, MPPS V21) or a local garage that has one. Takes a few minutes through the OBD port.
ORCA tunes the fileA calibration for this exact engine, checked against 55 safety limits, back in one to three days.
Flash it backYour stock file is kept as a backup, so it is fully reversible, with 30 days of support.
ServicePriceNeeds
Stage 1 Remote£199Standard car, software only. 205 bhp and 447 Nm on this engine.
Stage 2 Remote£299Uprated intercooler, high-flow intake, sports catalyst already fitted. 205 bhp and 447 Nm.
Diagnostic file analysis£49Read-only check of the existing file: detects a previous tune before you buy a used car.

Paid up front on orcahq.co.uk once ORCA confirms your engine and tool. Or ask first, no obligation:

Questions owners ask

How much power does a Peugeot 508 2011 gain from a remap?

A Stage 1 remap adds about 55 bhp and 77 Nm, taking it from 150 to 205 bhp. Stage 1 is software only.

Is it safe to remap a Peugeot 508 2011?

Remap risk is rated high (7/10). Very high 37% gain: approaching stock component limits. Full engine health inspection mandatory.

Does a remap affect the MOT or insurance on a Peugeot 508 2011?

A remap does not affect the MOT test, which does not read the ECU calibration. It is a modification for insurance purposes and must be declared to your insurer; most mainstream insurers accept a declared Stage 1 with a premium adjustment.

How is a Peugeot 508 2011 remapped?

Through the OBD diagnostic port in the cabin. The original file is read and saved first, then the modified calibration is written. Typically under two hours.

Check your exact car by registration

Free DVLA and MOT check, plus the remap verdict for the engine actually fitted to your car.

Other Peugeot engines

Peugeot 1007 2005 2009 · +31 bhpPeugeot 1007 2005 2009 · +24 bhpPeugeot 1007 2005 2009 · +10 bhpPeugeot 1007 2005 2009 · +6 bhpPeugeot 107 2005 · +5 bhpPeugeot 2008 2013 · +25 bhpPeugeot 2008 2013 · +38 bhpPeugeot 2008 2013 · +13 bhp

All Peugeot remaps

Remapping guides

What Is an ECU Remap? A Plain-English Guide for UK DriversIs Remapping a Car Worth It? An Honest UK GuideStage 1 vs Stage 2 Remap: What Is the Difference?

Power figures are published Stage 1 and Stage 2 results for this engine and are a guide. Actual gains depend on the car's condition, fuel and the map used. BeakCheck and ORCA Remapping are trading names of Bloor Engineering Ltd.