Peugeot 5008 2010 remap
Diesel · Flash via OBD · Figures published for this engine · Remote remap available UK-wide from £199
Is a remap worth it on the Peugeot 5008 2010?
This is one of the stronger candidates for a remap. The factory map leaves a lot on the table and a Stage 1 flash recovers most of it with no hardware.
What each stage needs
| Stage | Power | Torque | Hardware |
|---|---|---|---|
| Standard | 150 bhp | 340 Nm | None |
| Stage 1 | 201 bhp | 420 Nm | Software only |
| Stage 2 | 201 bhp | 420 Nm | Uprated intercooler, high-flow intake, sports catalyst |
Risk on this engine: medium
- High 34% gain: substantial stress on turbo(s) and fuel system.
- Diesel: no knock risk. Primary risks are EGT, turbo health, and injector wear.
How to keep the risk down
- Uprated intercooler strongly recommended.
- Full engine health check required.
- Verify fuel pump condition.
- Monitor EGT under hard driving: sustained temps above 700 C accelerate turbo wear.
- DPF (if fitted) will accumulate soot faster: ensure it is in good condition.
- Keep a copy of the original ECU file before flashing.
Remote remap for your Peugeot 5008 2010: Stage 1 from £199
No trip to a workshop. ORCA Remapping, part of the same company as BeakCheck, tunes your car's own ECU file and sends it back, UK-wide.
| Service | Price | Needs |
|---|---|---|
| Stage 1 Remote | £199 | Standard car, software only. 201 bhp and 420 Nm on this engine. |
| Stage 2 Remote | £299 | Uprated intercooler, high-flow intake, sports catalyst already fitted. 201 bhp and 420 Nm. |
| Diagnostic file analysis | £49 | Read-only check of the existing file: detects a previous tune before you buy a used car. |
Paid up front on orcahq.co.uk once ORCA confirms your engine and tool. Or ask first, no obligation:
Questions owners ask
How much power does a Peugeot 5008 2010 gain from a remap?
A Stage 1 remap adds about 51 bhp and 80 Nm, taking it from 150 to 201 bhp. Stage 1 is software only.
Is it safe to remap a Peugeot 5008 2010?
Remap risk is rated medium (5/10). High 34% gain: substantial stress on turbo(s) and fuel system. Uprated intercooler strongly recommended.
Does a remap affect the MOT or insurance on a Peugeot 5008 2010?
A remap does not affect the MOT test, which does not read the ECU calibration. It is a modification for insurance purposes and must be declared to your insurer; most mainstream insurers accept a declared Stage 1 with a premium adjustment.
How is a Peugeot 5008 2010 remapped?
Through the OBD diagnostic port in the cabin. The original file is read and saved first, then the modified calibration is written. Typically under two hours.
Check your exact car by registration
Free DVLA and MOT check, plus the remap verdict for the engine actually fitted to your car.
Other Peugeot engines
Remapping guides
Power figures are published Stage 1 and Stage 2 results for this engine and are a guide. Actual gains depend on the car's condition, fuel and the map used. BeakCheck and ORCA Remapping are trading names of Bloor Engineering Ltd.