BCBeakCheck
Remap database › Chevrolet › Chevrolet Trax 2013

Chevrolet Trax 2013 remap

Petrol · Flash via OBD · Figures published for this engine · Remote remap available UK-wide from £199

The Chevrolet Trax 2013 makes 113 bhp and 155 Nm as standard. A Stage 1 ECU remap takes it to 121 bhp and 165 Nm, a gain of 8 bhp (7%) with no hardware changes. Remap risk for this engine is low, 1 out of 10.
Standard
113 bhp
155 Nm
Stage 1
121 bhp
165 Nm · +8 bhp
Remap risk
LOW
1 / 10

Is a remap worth it on the Chevrolet Trax 2013?

The gain is small on this engine. Most owners remap it for throttle response and economy rather than power.

What each stage needs

StagePowerTorqueHardware
Standard113 bhp155 NmNone
Stage 1121 bhp165 NmSoftware only

Risk on this engine: low

How to keep the risk down

Remote remap for your Chevrolet Trax 2013: Stage 1 from £199

No trip to a workshop. ORCA Remapping, part of the same company as BeakCheck, tunes your car's own ECU file and sends it back, UK-wide.

Read the ECUWith your own tool (AutoTuner, KESS3, Alientech KTM, MPPS V21) or a local garage that has one. Takes a few minutes through the OBD port.
ORCA tunes the fileA calibration for this exact engine, checked against 55 safety limits, back in one to three days.
Flash it backYour stock file is kept as a backup, so it is fully reversible, with 30 days of support.
ServicePriceNeeds
Stage 1 Remote£199Standard car, software only. 121 bhp and 165 Nm on this engine.
Diagnostic file analysis£49Read-only check of the existing file: detects a previous tune before you buy a used car.

Paid up front on orcahq.co.uk once ORCA confirms your engine and tool. Or ask first, no obligation:

Questions owners ask

How much power does a Chevrolet Trax 2013 gain from a remap?

A Stage 1 remap adds about 8 bhp and 10 Nm, taking it from 113 to 121 bhp. Stage 1 is software only.

Is it safe to remap a Chevrolet Trax 2013?

Remap risk is rated low (1/10). Conservative 7% gain: well within ECU safety margins. Use RON 97+ fuel to maximise timing advance.

Does a remap affect the MOT or insurance on a Chevrolet Trax 2013?

A remap does not affect the MOT test, which does not read the ECU calibration. It is a modification for insurance purposes and must be declared to your insurer; most mainstream insurers accept a declared Stage 1 with a premium adjustment.

How is a Chevrolet Trax 2013 remapped?

Through the OBD diagnostic port in the cabin. The original file is read and saved first, then the modified calibration is written. Typically under two hours.

Check your exact car by registration

Free DVLA and MOT check, plus the remap verdict for the engine actually fitted to your car.

Other Chevrolet engines

Chevrolet Aveo 2011 · +38 bhpChevrolet Camaro 2010 · +20 bhpChevrolet Camaro 2010 · +35 bhpChevrolet Captiva 2007 · +39 bhpChevrolet Captiva 2007 · +40 bhpChevrolet Colorado 2012 · +40 bhpChevrolet Corvette 2005 2013 · +40 bhpChevrolet Corvette 2005 2013 · +30 bhp

All Chevrolet remaps

Remapping guides

What Is an ECU Remap? A Plain-English Guide for UK DriversIs Remapping a Car Worth It? An Honest UK GuideStage 1 vs Stage 2 Remap: What Is the Difference?

Power figures are published Stage 1 and Stage 2 results for this engine and are a guide. Actual gains depend on the car's condition, fuel and the map used. BeakCheck and ORCA Remapping are trading names of Bloor Engineering Ltd.