Chevrolet Silverado 2014 remap
Diesel · Flash via OBD · Figures published for this engine · Remote remap available UK-wide from £199
Is a remap worth it on the Chevrolet Silverado 2014?
A worthwhile remap. The gain is clearly felt on the road, especially in the mid-range where the torque increase lands.
What each stage needs
| Stage | Power | Torque | Hardware |
|---|---|---|---|
| Standard | 397 bhp | 1037 Nm | None |
| Stage 1 | 480 bhp | 1220 Nm | Software only |
Risk on this engine: low
- Significant 21% gain: boost and fuelling pushed beyond factory settings.
- Diesel: no knock risk. Primary risks are EGT, turbo health, and injector wear.
How to keep the risk down
- Check intercooler efficiency before tuning.
- Monitor EGT under hard driving: sustained temps above 700 C accelerate turbo wear.
- DPF (if fitted) will accumulate soot faster: ensure it is in good condition.
- Keep a copy of the original ECU file before flashing.
Remote remap for your Chevrolet Silverado 2014: Stage 1 from £199
No trip to a workshop. ORCA Remapping, part of the same company as BeakCheck, tunes your car's own ECU file and sends it back, UK-wide.
| Service | Price | Needs |
|---|---|---|
| Stage 1 Remote | £199 | Standard car, software only. 480 bhp and 1220 Nm on this engine. |
| Diagnostic file analysis | £49 | Read-only check of the existing file: detects a previous tune before you buy a used car. |
Paid up front on orcahq.co.uk once ORCA confirms your engine and tool. Or ask first, no obligation:
Questions owners ask
How much power does a Chevrolet Silverado 2014 gain from a remap?
A Stage 1 remap adds about 83 bhp and 183 Nm, taking it from 397 to 480 bhp. Stage 1 is software only.
Is it safe to remap a Chevrolet Silverado 2014?
Remap risk is rated low (3/10). Significant 21% gain: boost and fuelling pushed beyond factory settings. Check intercooler efficiency before tuning.
Does a remap affect the MOT or insurance on a Chevrolet Silverado 2014?
A remap does not affect the MOT test, which does not read the ECU calibration. It is a modification for insurance purposes and must be declared to your insurer; most mainstream insurers accept a declared Stage 1 with a premium adjustment.
How is a Chevrolet Silverado 2014 remapped?
Through the OBD diagnostic port in the cabin. The original file is read and saved first, then the modified calibration is written. Typically under two hours.
Check your exact car by registration
Free DVLA and MOT check, plus the remap verdict for the engine actually fitted to your car.
Other Chevrolet engines
Remapping guides
Power figures are published Stage 1 and Stage 2 results for this engine and are a guide. Actual gains depend on the car's condition, fuel and the map used. BeakCheck and ORCA Remapping are trading names of Bloor Engineering Ltd.