BCBeakCheck
Remap database › Vauxhall › Vauxhall Insignia 2008

Vauxhall Insignia 2008 remap

Diesel · Flash via OBD · Figures published for this engine · Remote remap available UK-wide from £199

The Vauxhall Insignia 2008 makes 128 bhp and 300 Nm as standard. A Stage 1 ECU remap takes it to 157 bhp and 350 Nm, a gain of 29 bhp (23%) with no hardware changes. Stage 2, with uprated intercooler, high-flow intake, sports catalyst, reaches 203 bhp and 414 Nm. Remap risk for this engine is low, 3 out of 10.
Standard
128 bhp
300 Nm
Stage 1
157 bhp
350 Nm · +29 bhp
Stage 2
203 bhp
414 Nm · +75 bhp
Remap risk
LOW
3 / 10

Is a remap worth it on the Vauxhall Insignia 2008?

A worthwhile remap. The gain is clearly felt on the road, especially in the mid-range where the torque increase lands.

What each stage needs

StagePowerTorqueHardware
Standard128 bhp300 NmNone
Stage 1157 bhp350 NmSoftware only
Stage 2203 bhp414 NmUprated intercooler, high-flow intake, sports catalyst

Risk on this engine: low

How to keep the risk down

Remote remap for your Vauxhall Insignia 2008: Stage 1 from £199

No trip to a workshop. ORCA Remapping, part of the same company as BeakCheck, tunes your car's own ECU file and sends it back, UK-wide.

Read the ECUWith your own tool (AutoTuner, KESS3, Alientech KTM, MPPS V21) or a local garage that has one. Takes a few minutes through the OBD port.
ORCA tunes the fileA calibration for this exact engine, checked against 55 safety limits, back in one to three days.
Flash it backYour stock file is kept as a backup, so it is fully reversible, with 30 days of support.
ServicePriceNeeds
Stage 1 Remote£199Standard car, software only. 157 bhp and 350 Nm on this engine.
Stage 2 Remote£299Uprated intercooler, high-flow intake, sports catalyst already fitted. 203 bhp and 414 Nm.
Diagnostic file analysis£49Read-only check of the existing file: detects a previous tune before you buy a used car.

Paid up front on orcahq.co.uk once ORCA confirms your engine and tool. Or ask first, no obligation:

Questions owners ask

How much power does a Vauxhall Insignia 2008 gain from a remap?

A Stage 1 remap adds about 29 bhp and 50 Nm, taking it from 128 to 157 bhp. Stage 1 is software only.

Is it safe to remap a Vauxhall Insignia 2008?

Remap risk is rated low (3/10). Significant 23% gain: boost and fuelling pushed beyond factory settings. Check intercooler efficiency before tuning.

Does a remap affect the MOT or insurance on a Vauxhall Insignia 2008?

A remap does not affect the MOT test, which does not read the ECU calibration. It is a modification for insurance purposes and must be declared to your insurer; most mainstream insurers accept a declared Stage 1 with a premium adjustment.

How is a Vauxhall Insignia 2008 remapped?

Through the OBD diagnostic port in the cabin. The original file is read and saved first, then the modified calibration is written. Typically under two hours.

Check your exact car by registration

Free DVLA and MOT check, plus the remap verdict for the engine actually fitted to your car.

Other Vauxhall engines

Vauxhall Adam 2013 · +28 bhpVauxhall Adam 2013 · +7 bhpVauxhall Adam 2013 · +22 bhpVauxhall Agila A 2000 2007 · +5 bhpVauxhall Agila A 2000 2007 · +5 bhpVauxhall Agila B 2008 · +38 bhpVauxhall Agila B 2008 · +5 bhpVauxhall Agila B 2008 · +5 bhp

All Vauxhall remaps

Remapping guides

What Is an ECU Remap? A Plain-English Guide for UK DriversIs Remapping a Car Worth It? An Honest UK GuideStage 1 vs Stage 2 Remap: What Is the Difference?

Power figures are published Stage 1 and Stage 2 results for this engine and are a guide. Actual gains depend on the car's condition, fuel and the map used. BeakCheck and ORCA Remapping are trading names of Bloor Engineering Ltd.