BCBeakCheck
Remap database › Renault Trucks › Renault Trucks Midlum

Renault Trucks Midlum remap

Diesel · Flash via OBD · Figures published for this engine · Remote remap available UK-wide from £199

The Renault Trucks Midlum makes 220 bhp and 800 Nm as standard. A Stage 1 ECU remap takes it to 252 bhp and 902 Nm, a gain of 32 bhp (15%) with no hardware changes. Remap risk for this engine is low, 1 out of 10.
Standard
220 bhp
800 Nm
Stage 1
252 bhp
902 Nm · +32 bhp
Remap risk
LOW
1 / 10

Is a remap worth it on the Renault Trucks Midlum?

A modest but real gain. Worth it for drivability and mid-range pull rather than headline power.

What each stage needs

StagePowerTorqueHardware
Standard220 bhp800 NmNone
Stage 1252 bhp902 NmSoftware only

Risk on this engine: low

How to keep the risk down

Remote remap for your Renault Trucks Midlum: Stage 1 from £199

No trip to a workshop. ORCA Remapping, part of the same company as BeakCheck, tunes your car's own ECU file and sends it back, UK-wide.

Read the ECUWith your own tool (AutoTuner, KESS3, Alientech KTM, MPPS V21) or a local garage that has one. Takes a few minutes through the OBD port.
ORCA tunes the fileA calibration for this exact engine, checked against 55 safety limits, back in one to three days.
Flash it backYour stock file is kept as a backup, so it is fully reversible, with 30 days of support.
ServicePriceNeeds
Stage 1 Remote£199Standard car, software only. 252 bhp and 902 Nm on this engine.
Diagnostic file analysis£49Read-only check of the existing file: detects a previous tune before you buy a used car.

Paid up front on orcahq.co.uk once ORCA confirms your engine and tool. Or ask first, no obligation:

Questions owners ask

How much power does a Renault Trucks Midlum gain from a remap?

A Stage 1 remap adds about 32 bhp and 102 Nm, taking it from 220 to 252 bhp. Stage 1 is software only.

Is it safe to remap a Renault Trucks Midlum?

Remap risk is rated low (1/10). Moderate 15% gain: standard remap territory. Monitor EGT under hard driving: sustained temps above 700 C accelerate turbo wear.

Does a remap affect the MOT or insurance on a Renault Trucks Midlum?

A remap does not affect the MOT test, which does not read the ECU calibration. It is a modification for insurance purposes and must be declared to your insurer; most mainstream insurers accept a declared Stage 1 with a premium adjustment.

How is a Renault Trucks Midlum remapped?

Through the OBD diagnostic port in the cabin. The original file is read and saved first, then the modified calibration is written. Typically under two hours.

Check your exact car by registration

Free DVLA and MOT check, plus the remap verdict for the engine actually fitted to your car.

Other Renault Trucks engines

Renault Trucks Kerax · +55 bhpRenault Trucks Kerax · +50 bhpRenault Trucks Kerax · +60 bhpRenault Trucks Maxity · +30 bhpRenault Trucks Maxity · +40 bhpRenault Trucks Midlum · +35 bhpRenault Trucks Midlum · +50 bhpRenault Trucks Premium · +55 bhp

All Renault Trucks remaps

Remapping guides

What Is an ECU Remap? A Plain-English Guide for UK DriversIs Remapping a Car Worth It? An Honest UK GuideStage 1 vs Stage 2 Remap: What Is the Difference?

Power figures are published Stage 1 and Stage 2 results for this engine and are a guide. Actual gains depend on the car's condition, fuel and the map used. BeakCheck and ORCA Remapping are trading names of Bloor Engineering Ltd.