BCBeakCheck
Remap database › Hyundai › Hyundai I30 2012

Hyundai I30 2012 remap

Diesel · Flash via OBD · Figures published for this engine · Remote remap available UK-wide from £199

The Hyundai I30 2012 makes 108 bhp and 260 Nm as standard. A Stage 1 ECU remap takes it to 165 bhp and 336 Nm, a gain of 57 bhp (53%) with no hardware changes. Stage 2, with uprated intercooler, high-flow intake, sports catalyst, reaches 165 bhp and 336 Nm. Remap risk for this engine is high, 7 out of 10.
Standard
108 bhp
260 Nm
Stage 1
165 bhp
336 Nm · +57 bhp
Stage 2
165 bhp
336 Nm · +57 bhp
Remap risk
HIGH
7 / 10

Is a remap worth it on the Hyundai I30 2012?

This is one of the stronger candidates for a remap. The factory map leaves a lot on the table and a Stage 1 flash recovers most of it with no hardware.

What each stage needs

StagePowerTorqueHardware
Standard108 bhp260 NmNone
Stage 1165 bhp336 NmSoftware only
Stage 2165 bhp336 NmUprated intercooler, high-flow intake, sports catalyst

Risk on this engine: high

How to keep the risk down

Remote remap for your Hyundai I30 2012: Stage 1 from £199

No trip to a workshop. ORCA Remapping, part of the same company as BeakCheck, tunes your car's own ECU file and sends it back, UK-wide.

Read the ECUWith your own tool (AutoTuner, KESS3, Alientech KTM, MPPS V21) or a local garage that has one. Takes a few minutes through the OBD port.
ORCA tunes the fileA calibration for this exact engine, checked against 55 safety limits, back in one to three days.
Flash it backYour stock file is kept as a backup, so it is fully reversible, with 30 days of support.
ServicePriceNeeds
Stage 1 Remote£199Standard car, software only. 165 bhp and 336 Nm on this engine.
Stage 2 Remote£299Uprated intercooler, high-flow intake, sports catalyst already fitted. 165 bhp and 336 Nm.
Diagnostic file analysis£49Read-only check of the existing file: detects a previous tune before you buy a used car.

Paid up front on orcahq.co.uk once ORCA confirms your engine and tool. Or ask first, no obligation:

Questions owners ask

How much power does a Hyundai I30 2012 gain from a remap?

A Stage 1 remap adds about 57 bhp and 76 Nm, taking it from 108 to 165 bhp. Stage 1 is software only.

Is it safe to remap a Hyundai I30 2012?

Remap risk is rated high (7/10). Very high 53% gain: approaching stock component limits. Full engine health inspection mandatory.

Does a remap affect the MOT or insurance on a Hyundai I30 2012?

A remap does not affect the MOT test, which does not read the ECU calibration. It is a modification for insurance purposes and must be declared to your insurer; most mainstream insurers accept a declared Stage 1 with a premium adjustment.

How is a Hyundai I30 2012 remapped?

Through the OBD diagnostic port in the cabin. The original file is read and saved first, then the modified calibration is written. Typically under two hours.

Check your exact car by registration

Free DVLA and MOT check, plus the remap verdict for the engine actually fitted to your car.

Other Hyundai engines

Hyundai Accent 2000 2005 · +42 bhpHyundai Elantra 2001 2006 · +35 bhpHyundai Getz 2002 2009 · +42 bhpHyundai I10 2013 · +6 bhpHyundai I20 2009 2014 · +20 bhpHyundai I20 2009 2014 · +31 bhpHyundai I20 2015 · +27 bhpHyundai I20 2015 · +42 bhp

All Hyundai remaps

Remapping guides

What Is an ECU Remap? A Plain-English Guide for UK DriversIs Remapping a Car Worth It? An Honest UK GuideStage 1 vs Stage 2 Remap: What Is the Difference?

Power figures are published Stage 1 and Stage 2 results for this engine and are a guide. Actual gains depend on the car's condition, fuel and the map used. BeakCheck and ORCA Remapping are trading names of Bloor Engineering Ltd.