Ford S Max 2006 2009 remap
Petrol · Flash via OBD · Figures published for this engine · Remote remap available UK-wide from £199
Is a remap worth it on the Ford S Max 2006 2009?
A worthwhile remap. The gain is clearly felt on the road, especially in the mid-range where the torque increase lands.
What each stage needs
| Stage | Power | Torque | Hardware |
|---|---|---|---|
| Standard | 216 bhp | 324 Nm | None |
| Stage 1 | 278 bhp | 427 Nm | Software only |
Risk on this engine: high
- High 29% gain: substantial stress on turbo(s) and fuel system.
- Torque rises by 103 Nm (32%): elevated drivetrain and clutch stress.
- Naturally aspirated: lower mechanical risk. Gains from timing and fuelling optimisation.
How to keep the risk down
- Uprated intercooler strongly recommended.
- Full engine health check required.
- Verify fuel pump condition.
- Inspect clutch condition before tuning.
- Use RON 97+ fuel to maximise timing advance.
- Keep a copy of the original ECU file before flashing.
Remote remap for your Ford S Max 2006 2009: Stage 1 from £199
No trip to a workshop. ORCA Remapping, part of the same company as BeakCheck, tunes your car's own ECU file and sends it back, UK-wide.
| Service | Price | Needs |
|---|---|---|
| Stage 1 Remote | £199 | Standard car, software only. 278 bhp and 427 Nm on this engine. |
| Diagnostic file analysis | £49 | Read-only check of the existing file: detects a previous tune before you buy a used car. |
Paid up front on orcahq.co.uk once ORCA confirms your engine and tool. Or ask first, no obligation:
Questions owners ask
How much power does a Ford S Max 2006 2009 gain from a remap?
A Stage 1 remap adds about 62 bhp and 103 Nm, taking it from 216 to 278 bhp. Stage 1 is software only.
Is it safe to remap a Ford S Max 2006 2009?
Remap risk is rated high (7/10). High 29% gain: substantial stress on turbo(s) and fuel system. Uprated intercooler strongly recommended.
Does a remap affect the MOT or insurance on a Ford S Max 2006 2009?
A remap does not affect the MOT test, which does not read the ECU calibration. It is a modification for insurance purposes and must be declared to your insurer; most mainstream insurers accept a declared Stage 1 with a premium adjustment.
How is a Ford S Max 2006 2009 remapped?
Through the OBD diagnostic port in the cabin. The original file is read and saved first, then the modified calibration is written. Typically under two hours.
Check your exact car by registration
Free DVLA and MOT check, plus the remap verdict for the engine actually fitted to your car.
Other Ford engines
Remapping guides
Power figures are published Stage 1 and Stage 2 results for this engine and are a guide. Actual gains depend on the car's condition, fuel and the map used. BeakCheck and ORCA Remapping are trading names of Bloor Engineering Ltd.