BCBeakCheck
Remap database › Ford › Ford Connect 2014

Ford Connect 2014 remap

Diesel · Flash via OBD · Figures published for this engine · Remote remap available UK-wide from £199

The Ford Connect 2014 makes 75 bhp and 220 Nm as standard. A Stage 1 ECU remap takes it to 100 bhp and 249 Nm, a gain of 25 bhp (33%) with no hardware changes. Stage 2, with uprated intercooler, high-flow intake, sports catalyst, reaches 120 bhp and 270 Nm. Remap risk for this engine is medium, 5 out of 10.
Standard
75 bhp
220 Nm
Stage 1
100 bhp
249 Nm · +25 bhp
Stage 2
120 bhp
270 Nm · +45 bhp
Remap risk
MEDIUM
5 / 10

Is a remap worth it on the Ford Connect 2014?

This is one of the stronger candidates for a remap. The factory map leaves a lot on the table and a Stage 1 flash recovers most of it with no hardware.

What each stage needs

StagePowerTorqueHardware
Standard75 bhp220 NmNone
Stage 1100 bhp249 NmSoftware only
Stage 2120 bhp270 NmUprated intercooler, high-flow intake, sports catalyst

Risk on this engine: medium

How to keep the risk down

Remote remap for your Ford Connect 2014: Stage 1 from £199

No trip to a workshop. ORCA Remapping, part of the same company as BeakCheck, tunes your car's own ECU file and sends it back, UK-wide.

Read the ECUWith your own tool (AutoTuner, KESS3, Alientech KTM, MPPS V21) or a local garage that has one. Takes a few minutes through the OBD port.
ORCA tunes the fileA calibration for this exact engine, checked against 55 safety limits, back in one to three days.
Flash it backYour stock file is kept as a backup, so it is fully reversible, with 30 days of support.
ServicePriceNeeds
Stage 1 Remote£199Standard car, software only. 100 bhp and 249 Nm on this engine.
Stage 2 Remote£299Uprated intercooler, high-flow intake, sports catalyst already fitted. 120 bhp and 270 Nm.
Diagnostic file analysis£49Read-only check of the existing file: detects a previous tune before you buy a used car.

Paid up front on orcahq.co.uk once ORCA confirms your engine and tool. Or ask first, no obligation:

Questions owners ask

How much power does a Ford Connect 2014 gain from a remap?

A Stage 1 remap adds about 25 bhp and 29 Nm, taking it from 75 to 100 bhp. Stage 1 is software only.

Is it safe to remap a Ford Connect 2014?

Remap risk is rated medium (5/10). High 33% gain: substantial stress on turbo(s) and fuel system. Uprated intercooler strongly recommended.

Does a remap affect the MOT or insurance on a Ford Connect 2014?

A remap does not affect the MOT test, which does not read the ECU calibration. It is a modification for insurance purposes and must be declared to your insurer; most mainstream insurers accept a declared Stage 1 with a premium adjustment.

How is a Ford Connect 2014 remapped?

Through the OBD diagnostic port in the cabin. The original file is read and saved first, then the modified calibration is written. Typically under two hours.

Check your exact car by registration

Free DVLA and MOT check, plus the remap verdict for the engine actually fitted to your car.

Other Ford engines

Ford B Max 2012 · +37 bhpFord B Max 2012 · +18 bhpFord B Max 2012 · +8 bhpFord B Max 2012 · +60 bhpFord Cargo 2003 · +50 bhpFord Cargo 2003 · +50 bhpFord Cargo 2003 · +50 bhpFord Cargo 2003 · +50 bhp

All Ford remaps

Remapping guides

What Is an ECU Remap? A Plain-English Guide for UK DriversIs Remapping a Car Worth It? An Honest UK GuideStage 1 vs Stage 2 Remap: What Is the Difference?

Power figures are published Stage 1 and Stage 2 results for this engine and are a guide. Actual gains depend on the car's condition, fuel and the map used. BeakCheck and ORCA Remapping are trading names of Bloor Engineering Ltd.