Fiat 500L 2012 remap
Petrol · Flash via OBD · Figures published for this engine · Remote remap available UK-wide from £199
Is a remap worth it on the Fiat 500L 2012?
This is one of the stronger candidates for a remap. The factory map leaves a lot on the table and a Stage 1 flash recovers most of it with no hardware.
What each stage needs
| Stage | Power | Torque | Hardware |
|---|---|---|---|
| Standard | 118 bhp | 216 Nm | None |
| Stage 1 | 160 bhp | 258 Nm | Software only |
Risk on this engine: high
- Very high 36% gain: approaching stock component limits.
- Naturally aspirated: lower mechanical risk. Gains from timing and fuelling optimisation.
How to keep the risk down
- Full engine health inspection mandatory.
- Uprated intercooler and charge pipes required.
- Oil cooler upgrade strongly advised.
- Use RON 97+ fuel to maximise timing advance.
- Keep a copy of the original ECU file before flashing.
Remote remap for your Fiat 500L 2012: Stage 1 from £199
No trip to a workshop. ORCA Remapping, part of the same company as BeakCheck, tunes your car's own ECU file and sends it back, UK-wide.
| Service | Price | Needs |
|---|---|---|
| Stage 1 Remote | £199 | Standard car, software only. 160 bhp and 258 Nm on this engine. |
| Diagnostic file analysis | £49 | Read-only check of the existing file: detects a previous tune before you buy a used car. |
Paid up front on orcahq.co.uk once ORCA confirms your engine and tool. Or ask first, no obligation:
Questions owners ask
How much power does a Fiat 500L 2012 gain from a remap?
A Stage 1 remap adds about 42 bhp and 42 Nm, taking it from 118 to 160 bhp. Stage 1 is software only.
Is it safe to remap a Fiat 500L 2012?
Remap risk is rated high (8/10). Very high 36% gain: approaching stock component limits. Full engine health inspection mandatory.
Does a remap affect the MOT or insurance on a Fiat 500L 2012?
A remap does not affect the MOT test, which does not read the ECU calibration. It is a modification for insurance purposes and must be declared to your insurer; most mainstream insurers accept a declared Stage 1 with a premium adjustment.
How is a Fiat 500L 2012 remapped?
Through the OBD diagnostic port in the cabin. The original file is read and saved first, then the modified calibration is written. Typically under two hours.
Check your exact car by registration
Free DVLA and MOT check, plus the remap verdict for the engine actually fitted to your car.
Other Fiat engines
Remapping guides
Power figures are published Stage 1 and Stage 2 results for this engine and are a guide. Actual gains depend on the car's condition, fuel and the map used. BeakCheck and ORCA Remapping are trading names of Bloor Engineering Ltd.