Ferrari Ff 2011 remap
Petrol · Flash via OBD · Figures published for this engine · Remote remap available UK-wide from £199
Is a remap worth it on the Ferrari Ff 2011?
The gain is small on this engine. Most owners remap it for throttle response and economy rather than power.
What each stage needs
| Stage | Power | Torque | Hardware |
|---|---|---|---|
| Standard | 660 bhp | 683 Nm | None |
| Stage 1 | 700 bhp | 719 Nm | Software only |
Risk on this engine: low
- Conservative 6% gain: well within ECU safety margins.
- Naturally aspirated: lower mechanical risk. Gains from timing and fuelling optimisation.
- Very high factory output (660 bhp): already near thermal limits.
How to keep the risk down
- Use RON 97+ fuel to maximise timing advance.
- Premium full-synthetic oil (0W-40 or 5W-50) mandatory.
- Oil cooler upgrade recommended.
- Keep a copy of the original ECU file before flashing.
Remote remap for your Ferrari Ff 2011: Stage 1 from £199
No trip to a workshop. ORCA Remapping, part of the same company as BeakCheck, tunes your car's own ECU file and sends it back, UK-wide.
| Service | Price | Needs |
|---|---|---|
| Stage 1 Remote | £199 | Standard car, software only. 700 bhp and 719 Nm on this engine. |
| Diagnostic file analysis | £49 | Read-only check of the existing file: detects a previous tune before you buy a used car. |
Paid up front on orcahq.co.uk once ORCA confirms your engine and tool. Or ask first, no obligation:
Questions owners ask
How much power does a Ferrari Ff 2011 gain from a remap?
A Stage 1 remap adds about 40 bhp and 36 Nm, taking it from 660 to 700 bhp. Stage 1 is software only.
Is it safe to remap a Ferrari Ff 2011?
Remap risk is rated low (2/10). Conservative 6% gain: well within ECU safety margins. Use RON 97+ fuel to maximise timing advance.
Does a remap affect the MOT or insurance on a Ferrari Ff 2011?
A remap does not affect the MOT test, which does not read the ECU calibration. It is a modification for insurance purposes and must be declared to your insurer; most mainstream insurers accept a declared Stage 1 with a premium adjustment.
How is a Ferrari Ff 2011 remapped?
Through the OBD diagnostic port in the cabin. The original file is read and saved first, then the modified calibration is written. Typically under two hours.
Check your exact car by registration
Free DVLA and MOT check, plus the remap verdict for the engine actually fitted to your car.
Other Ferrari engines
Remapping guides
Power figures are published Stage 1 and Stage 2 results for this engine and are a guide. Actual gains depend on the car's condition, fuel and the map used. BeakCheck and ORCA Remapping are trading names of Bloor Engineering Ltd.