Daf Xf105 remap
Diesel · Flash via OBD · Figures published for this engine · Remote remap available UK-wide from £199
Is a remap worth it on the Daf Xf105?
A modest but real gain. Worth it for drivability and mid-range pull rather than headline power.
What each stage needs
| Stage | Power | Torque | Hardware |
|---|---|---|---|
| Standard | 510 bhp | 2500 Nm | None |
| Stage 1 | 570 bhp | 2874 Nm | Software only |
Risk on this engine: low
- Moderate 12% gain: standard remap territory.
- Diesel: no knock risk. Primary risks are EGT, turbo health, and injector wear.
- Very high factory output (510 bhp): already near thermal limits.
How to keep the risk down
- Monitor EGT under hard driving: sustained temps above 700 C accelerate turbo wear.
- Premium full-synthetic oil (0W-40 or 5W-50) mandatory.
- Oil cooler upgrade recommended.
- Keep a copy of the original ECU file before flashing.
Remote remap for your Daf Xf105: Stage 1 from £199
No trip to a workshop. ORCA Remapping, part of the same company as BeakCheck, tunes your car's own ECU file and sends it back, UK-wide.
| Service | Price | Needs |
|---|---|---|
| Stage 1 Remote | £199 | Standard car, software only. 570 bhp and 2874 Nm on this engine. |
| Diagnostic file analysis | £49 | Read-only check of the existing file: detects a previous tune before you buy a used car. |
Paid up front on orcahq.co.uk once ORCA confirms your engine and tool. Or ask first, no obligation:
Questions owners ask
How much power does a Daf Xf105 gain from a remap?
A Stage 1 remap adds about 60 bhp and 374 Nm, taking it from 510 to 570 bhp. Stage 1 is software only.
Is it safe to remap a Daf Xf105?
Remap risk is rated low (2/10). Moderate 12% gain: standard remap territory. Monitor EGT under hard driving: sustained temps above 700 C accelerate turbo wear.
Does a remap affect the MOT or insurance on a Daf Xf105?
A remap does not affect the MOT test, which does not read the ECU calibration. It is a modification for insurance purposes and must be declared to your insurer; most mainstream insurers accept a declared Stage 1 with a premium adjustment.
How is a Daf Xf105 remapped?
Through the OBD diagnostic port in the cabin. The original file is read and saved first, then the modified calibration is written. Typically under two hours.
Check your exact car by registration
Free DVLA and MOT check, plus the remap verdict for the engine actually fitted to your car.
Other DAF engines
Remapping guides
Power figures are published Stage 1 and Stage 2 results for this engine and are a guide. Actual gains depend on the car's condition, fuel and the map used. BeakCheck and ORCA Remapping are trading names of Bloor Engineering Ltd.