Remap database › Chrysler › Chrysler Ypsilon 2011

Chrysler Ypsilon 2011 remap

Petrol · Flash via OBD · Figures published for this engine · Remote remap available UK-wide from £199

The Chrysler Ypsilon 2011 makes 85 bhp and 145 Nm as standard. A Stage 1 ECU remap takes it to 100 bhp and 179 Nm, a gain of 15 bhp (18%) with no hardware changes. Remap risk for this engine is medium, 4 out of 10.

Standard

85 bhp

145 Nm

Stage 1

100 bhp

179 Nm · +15 bhp

Remap risk

MEDIUM

4 / 10

Is a remap worth it on the Chrysler Ypsilon 2011?

A modest but real gain. Worth it for drivability and mid-range pull rather than headline power.

What each stage needs

Stage	Power	Torque	Hardware
Standard	85 bhp	145 Nm	None
Stage 1	100 bhp	179 Nm	Software only

Risk on this engine: medium

Significant 18% gain: boost and fuelling pushed beyond factory settings.
Naturally aspirated: lower mechanical risk. Gains from timing and fuelling optimisation.

How to keep the risk down

Check intercooler efficiency before tuning.
Use RON 97+ fuel to maximise timing advance.
Keep a copy of the original ECU file before flashing.

Remote remap for your Chrysler Ypsilon 2011: Stage 1 from £199

No trip to a workshop. ORCA Remapping, part of the same company as BeakCheck, tunes your car's own ECU file and sends it back, UK-wide.

Read the ECUWith your own tool (AutoTuner, KESS3, Alientech KTM, MPPS V21) or a local garage that has one. Takes a few minutes through the OBD port.

ORCA tunes the fileA calibration for this exact engine, checked against 55 safety limits, back in one to three days.

Flash it backYour stock file is kept as a backup, so it is fully reversible, with 30 days of support.

Service	Price	Needs
Stage 1 Remote	£199	Standard car, software only. 100 bhp and 179 Nm on this engine.
Diagnostic file analysis	£49	Read-only check of the existing file: detects a previous tune before you buy a used car.

Paid up front on orcahq.co.uk once ORCA confirms your engine and tool. Or ask first, no obligation:

Questions owners ask

How much power does a Chrysler Ypsilon 2011 gain from a remap?

A Stage 1 remap adds about 15 bhp and 34 Nm, taking it from 85 to 100 bhp. Stage 1 is software only.

Is it safe to remap a Chrysler Ypsilon 2011?

Remap risk is rated medium (4/10). Significant 18% gain: boost and fuelling pushed beyond factory settings. Check intercooler efficiency before tuning.

Does a remap affect the MOT or insurance on a Chrysler Ypsilon 2011?

A remap does not affect the MOT test, which does not read the ECU calibration. It is a modification for insurance purposes and must be declared to your insurer; most mainstream insurers accept a declared Stage 1 with a premium adjustment.

How is a Chrysler Ypsilon 2011 remapped?

Through the OBD diagnostic port in the cabin. The original file is read and saved first, then the modified calibration is written. Typically under two hours.

Check your exact car by registration

Free DVLA and MOT check, plus the remap verdict for the engine actually fitted to your car.

Other Chrysler engines

Chrysler 300C 2005 2010 · +75 bhp Chrysler 300C 2005 2010 · +35 bhp Chrysler 300C 2005 2010 · +40 bhp Chrysler Crossfire 2003 2008 · +25 bhp Chrysler Delta 2011 · +40 bhp Chrysler Delta 2011 · +38 bhp Chrysler Delta 2011 · +60 bhp Chrysler Grand Voyager 1998 2001 · +31 bhp

All Chrysler remaps

Remapping guides

What Is an ECU Remap? A Plain-English Guide for UK Drivers Is Remapping a Car Worth It? An Honest UK Guide Stage 1 vs Stage 2 Remap: What Is the Difference?

Power figures are published Stage 1 and Stage 2 results for this engine and are a guide. Actual gains depend on the car's condition, fuel and the map used. BeakCheck and ORCA Remapping are trading names of Bloor Engineering Ltd.