Audi Rs6 C7 2013 remap
Petrol · Flash via OBD · Figures published for this engine · Remote remap available UK-wide from £199
Is a remap worth it on the Audi Rs6 C7 2013?
A worthwhile remap. The gain is clearly felt on the road, especially in the mid-range where the torque increase lands.
What each stage needs
| Stage | Power | Torque | Hardware |
|---|---|---|---|
| Standard | 596 bhp | 750 Nm | None |
| Stage 1 | 713 bhp | 963 Nm | Software only |
Risk on this engine: medium
- Significant 20% gain: boost and fuelling pushed beyond factory settings.
- Turbocharged petrol: knock is the primary risk. A worn knock sensor cannot protect the engine.
- Very high factory output (596 bhp): already near thermal limits.
How to keep the risk down
- Check intercooler efficiency before tuning.
- Use minimum RON 97 fuel.
- Verify knock sensor function before tuning.
- Premium full-synthetic oil (0W-40 or 5W-50) mandatory.
- Oil cooler upgrade recommended.
- Keep a copy of the original ECU file before flashing.
Remote remap for your Audi Rs6 C7 2013: Stage 1 from £199
No trip to a workshop. ORCA Remapping, part of the same company as BeakCheck, tunes your car's own ECU file and sends it back, UK-wide.
| Service | Price | Needs |
|---|---|---|
| Stage 1 Remote | £199 | Standard car, software only. 713 bhp and 963 Nm on this engine. |
| Diagnostic file analysis | £49 | Read-only check of the existing file: detects a previous tune before you buy a used car. |
Paid up front on orcahq.co.uk once ORCA confirms your engine and tool. Or ask first, no obligation:
Questions owners ask
How much power does a Audi Rs6 C7 2013 gain from a remap?
A Stage 1 remap adds about 117 bhp and 213 Nm, taking it from 596 to 713 bhp. Stage 1 is software only.
Is it safe to remap a Audi Rs6 C7 2013?
Remap risk is rated medium (6/10). Significant 20% gain: boost and fuelling pushed beyond factory settings. Check intercooler efficiency before tuning.
Does a remap affect the MOT or insurance on a Audi Rs6 C7 2013?
A remap does not affect the MOT test, which does not read the ECU calibration. It is a modification for insurance purposes and must be declared to your insurer; most mainstream insurers accept a declared Stage 1 with a premium adjustment.
How is a Audi Rs6 C7 2013 remapped?
Through the OBD diagnostic port in the cabin. The original file is read and saved first, then the modified calibration is written. Typically under two hours.
Check your exact car by registration
Free DVLA and MOT check, plus the remap verdict for the engine actually fitted to your car.
Other Audi engines
Remapping guides
Power figures are published Stage 1 and Stage 2 results for this engine and are a guide. Actual gains depend on the car's condition, fuel and the map used. BeakCheck and ORCA Remapping are trading names of Bloor Engineering Ltd.