BCBeakCheck
Remap database › Audi › Audi A8 D4 2010

Audi A8 D4 2010 remap

Diesel · Flash via OBD · Figures published for this engine · Remote remap available UK-wide from £199

The Audi A8 D4 2010 makes 201 bhp and 400 Nm as standard. A Stage 1 ECU remap takes it to 255 bhp and 475 Nm, a gain of 54 bhp (27%) with no hardware changes. Stage 2, with uprated intercooler, high-flow intake, sports catalyst, reaches 255 bhp and 475 Nm. Remap risk for this engine is medium, 5 out of 10.
Standard
201 bhp
400 Nm
Stage 1
255 bhp
475 Nm · +54 bhp
Stage 2
255 bhp
475 Nm · +54 bhp
Remap risk
MEDIUM
5 / 10

Is a remap worth it on the Audi A8 D4 2010?

A worthwhile remap. The gain is clearly felt on the road, especially in the mid-range where the torque increase lands.

What each stage needs

StagePowerTorqueHardware
Standard201 bhp400 NmNone
Stage 1255 bhp475 NmSoftware only
Stage 2255 bhp475 NmUprated intercooler, high-flow intake, sports catalyst

Risk on this engine: medium

How to keep the risk down

Remote remap for your Audi A8 D4 2010: Stage 1 from £199

No trip to a workshop. ORCA Remapping, part of the same company as BeakCheck, tunes your car's own ECU file and sends it back, UK-wide.

Read the ECUWith your own tool (AutoTuner, KESS3, Alientech KTM, MPPS V21) or a local garage that has one. Takes a few minutes through the OBD port.
ORCA tunes the fileA calibration for this exact engine, checked against 55 safety limits, back in one to three days.
Flash it backYour stock file is kept as a backup, so it is fully reversible, with 30 days of support.
ServicePriceNeeds
Stage 1 Remote£199Standard car, software only. 255 bhp and 475 Nm on this engine.
Stage 2 Remote£299Uprated intercooler, high-flow intake, sports catalyst already fitted. 255 bhp and 475 Nm.
Diagnostic file analysis£49Read-only check of the existing file: detects a previous tune before you buy a used car.

Paid up front on orcahq.co.uk once ORCA confirms your engine and tool. Or ask first, no obligation:

Questions owners ask

How much power does a Audi A8 D4 2010 gain from a remap?

A Stage 1 remap adds about 54 bhp and 75 Nm, taking it from 201 to 255 bhp. Stage 1 is software only.

Is it safe to remap a Audi A8 D4 2010?

Remap risk is rated medium (5/10). High 27% gain: substantial stress on turbo(s) and fuel system. Uprated intercooler strongly recommended.

Does a remap affect the MOT or insurance on a Audi A8 D4 2010?

A remap does not affect the MOT test, which does not read the ECU calibration. It is a modification for insurance purposes and must be declared to your insurer; most mainstream insurers accept a declared Stage 1 with a premium adjustment.

How is a Audi A8 D4 2010 remapped?

Through the OBD diagnostic port in the cabin. The original file is read and saved first, then the modified calibration is written. Typically under two hours.

Check your exact car by registration

Free DVLA and MOT check, plus the remap verdict for the engine actually fitted to your car.

Other Audi engines

Audi A1 8X 2010 · +53 bhpAudi A1 8X 2010 · +32 bhpAudi A1 8X 2010 · +62 bhpAudi A1 8X 2010 · +57 bhpAudi A1 8X 2010 · +19 bhpAudi A1 8X 2010 · +40 bhpAudi A2 8Z 2000 2005 · +30 bhpAudi A2 8Z 2000 2005 · +10 bhp

All Audi remaps

Remapping guides

What Is an ECU Remap? A Plain-English Guide for UK DriversIs Remapping a Car Worth It? An Honest UK GuideStage 1 vs Stage 2 Remap: What Is the Difference?

Power figures are published Stage 1 and Stage 2 results for this engine and are a guide. Actual gains depend on the car's condition, fuel and the map used. BeakCheck and ORCA Remapping are trading names of Bloor Engineering Ltd.